ZAS 16.4ft 5050 SMD Yellow LED Flexible Strip Ribbon Light 5M 300 LEDs Waterproof IP65 DC 12V for Home Garden Commercial Area Lighting
- 【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.)
- 【Super Quality LED Strip】 300 pcs high-brightness 5050 Yellow LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful red light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children.
- 【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY.
- 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included.
- 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products.
ZAS Car 10 Ft Door Rubber Seal Strip, Fits 1/16″ Edge, Trim Seal with Top Bulb for Cars, Boats, RVs, Trucks, and Home Applications, Automotive Weather Striping
- 【Flexible PVC Trim】U Shape Trim contains internal metal clips to grip permanent around the install place and excellent grip retention, and rubber bulb to provide a secure seal for a variety of applications.
- 【Weather-Resistant】This rubber seal strip provides excellent protection against heat, extreme weather damage, and corrosion. High temperature resistance & cold resistance, prevent ultraviolet light.
- 【Safe And Durable】Durable EPDM foam rubber drowns out noise, eliminates vibration, and protects your vehicle, RV, boat, or home from outside elements. And effectively play a role in Noise Reduction, Waterproof, Dustproof & Soundproof & Windproof.
- 【Wide Range of Application】This rubber trim seal for a variety of applications including automotive door seals, RV compartment seals, boat hatch seals, door seals, storage container seals, tool box seals and decorative trim seals.
- 【Easy to Install】Not need to adhesive. Push-on trim seal allows for a fast installation and creates a finished edge seal that is durable and protects against the elements. The trim bulb seal fits 1/16"-2/25" edge, bulb diameter is 0.55".
ZAS 12V 150db Air Horn, 18 Inches Chrome Zinc Single Trumpet Truck Air Horn with Compressor for Any 12V Vehicles Trucks Lorrys Trains Boats Cars (Sliver)
- Newly upgraded compressor:All-copper coil,Vacuum chrome plating,fast response ability
- Material : High quality Chrome Plated ZINC Trumpets(Non-Rusting) Overall
- Relay Wiring Kit: ZAS Customized Safety Relay, no break design, easy to install
- Fits on Any 12 Volt Vehicle(Car, Truck, SUV, Motorcycle, Yacht, Boat, off Road Vehicle, Busses etc
- Super-Loud 150 dB sound can not be ignored. Please do not use it near school or hospital..
ZAS 12V 150db Car Air Horn, Super Loud Dual Trumpet Air Horn Kit with Compressor for Any 12V Vehicles Trucks Lorrys Trains Boats Cars Vans Kit (Black)
- 【150dB Super-Loud Train Horn】Upgraded interior structure can produce up to 150DB pleasing tone for any weather condition, which makes it a good safety companion while driving.
- 【Upgraded Air Compressor】ZAS truck horn has bigger coil, high-quality chrome plated zinc alloy material, stronger air pressure give the air horn louder and more clear warning to other's driving actions.
- 【High-Cost Performance】Chrome Plated ZINC Trumpet, All-copper coil, and train horns the metal trumpet and compressor are weather resistant, all kits are designed for long time service.
- 【Fit 12 Volt Vehicle】This train horn for truck works on any 112 Volt DC Power Vehicle, fit most cars, Truck, SUV, Motorcycle, Yacht, Boat, off Road Vehicle, Buses etc , also comes with a universal mount that makes the installation easier.
- 【Zero-Risk Purchase】If you meet any questions about air horn for truck please contact us, all HK products has a 30-day money back, 1-year warranty and lifetime technical support.
ZAS 10 Pack 6003-2RS Bearing – Lubricated Chrome Steel Sealed Ball Bearing – 17x35x10mm Bearings with Rubber Seal & High RPM Support – Ultra-Durability and High Pressure Survival
- Ultra-durable bearings: Our 6003-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.Ultra-durable bearings: Our 6003-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.
- Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity.Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity.
- High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.
- Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.
- Perfect for windmill bearings: This 17x35x10mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.Perfect for windmill bearings: This 25x47x12mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.
ZAS 10 Pack 6301-2RS Bearing – Lubricated Chrome Steel Sealed Ball Bearing – 12x37x12mm Bearings with Rubber Seal & High RPM Support – Ultra-Durability and High Pressure Survival
- Ultra-durable bearings: Our 6301-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.Ultra-durable bearings: Our 6301-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.
- Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity.Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity.
- High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.
- Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.
- Perfect for windmill bearings: This 12x37x12mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.Perfect for windmill bearings: This 25x47x12mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.
ZAS 10 Pack 6001-2RS Bearing – Lubricated Chrome Steel Sealed Ball Bearing – 12x28x8mm Bearings with Rubber Seal & High RPM Support – Ultra-Durability and High Pressure Survival
- Ultra-durable bearings: Our 6001-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.
- Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity
- High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.
- Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.
- Perfect for windmill bearings: This 12x28x8mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.
ZAS 10 Pack 6303-2RS Bearing – Lubricated Chrome Steel Sealed Ball Bearing – 17x47x14mm Bearings with Rubber Seal & High RPM Support – Ultra-Durability and High Pressure Survival
- Ultra-durable bearings: Our 6303-2RS Bearing is made of high-quality chrome steel and designed to survive high pressure and minimize wear and tear.
- Dual-sided rubber seal: Our bearing features a dual-sided rubber seal that protects the ball bearing and safeguards its integrity.
- High RPM support: With its lubricated design and rubber seal, our bearing is built to handle high RPMs and reduce replacement frequency.
- Sealed ball bearing: The lubricated chrome steel sealed ball bearing has ultra-resistant qualities that allow it to survive severe impacts.
- Perfect for windmill bearings: This 17x47x14mm bearing with rubber seal & high RPM support is ideal for windmill bearingsbearing and other high-pressure applications.
